| Based on Direct Digital Synthesized (DDS) technology and unique FPGA design, SFG-2000/2100 Series Function Generators are built with exceptionally high performance far exceeding that of any conventional
 function generators, at a very competitive price. Stable output frequency, low distortion, and fine
 frequency resolution are the most remarkable characteristics of this product series.
 | 
 
 | MAIN | 
 
 | Frequency Range(For Sine, Square)
 | 1Hz~20MHz | 
 
 | Frequency Range(For Triangle)
 | 1Hz~1MHz | 
 
 | Frequency Resolution | 1Hz  | 
 
 | Frequency Stability | ∮ 20 ppm | 
 
 | Frequency Accuracy | ∮ 20 ppm  | 
 
 | Frequency Aging  | ∮ 5 ppm / year | 
 
 | Output Function | Sine, Square, Triangle | 
 
 | Amplitude Range | 2mV~10Vpp(into 50?load) | 
 
 | Impedance | 50?∮10? | 
 
 | Attenuator | -20dB∮1dB⊙2  | 
 
 | DC Offset | ≌-5V°≈+5V(into 50?load)  | 
 
 | Duty Control Range  | 20% to 80%, 2Hz~1MHz (Square wave only)  | 
 
 | Range Resolution  | 1%  | 
 
 | Display | 9 digits LED display  | 
 
 | SINE WAVE | 
 
 | Harmonics Distortion | -55dBc,0.1Hz°200kHz; -40dBc,0.2MHz°4MHz; -30dBc,4MHz°10MHz(Specification applied to both TTL/CMOS OFF and from MAX. to 1/10 level)
 | 
 
 | Flatness (Relative to 1kHz) | ≌∮ 0.3dB,0.1Hz°1MHz; ≌∮ 0.5dB,1MHz°4MHz; ≌∮ 2dB, 4MHz°10MHz | 
 
 | TRIANGLE WAVE | 
 
 | Linearity | ≠98?,0.1Hz°100kHz;≠95?,100kHz°1MHz  | 
 
 | SQUARE WAVE | 
 
 | Symmetry | ∮ 1% of period +4ns to 0.1Hz°100kHz  | 
 
 | Rise or Fall Time | ∝25ns at maximum output.(into 50?load) | 
 
 | CMOS OUTPUT | 
 
 | Level | 4Vpp∮1Vpp°15Vpp∮1Vpp adjustable; Rise or Fall Time ∝120ns | 
 
 | TTL OUTPUT | 
 
 | Level | ≠3Vpp ; Fan Out; 20 TTL load ; Rise or Fall Time ∝25ns | 
 
 | SWEEP OPERATION  | 
 
 | Rate  | 100:1 ratio max. and adjustable ( In order to get maximum sweep span, the sweep time needs to be tuned on when adjust sweep span. )
 | 
 
 | Time | 1Sec°30Sec adjustable ( When the sweep time is too long, the stop frequency will reach and stay at the maximum frequency of instrument until the end of the sweep cycle. )
 | 
 
 | Mode | Lin./Log. switch selector | 
 
 | AMPLITUDE MODULATION  | 
 
 | Depth & Modulation Frequency | 0°100? ; 400Hz(INT), DC°1MHz(EXT) | 
 
 | Carrier BW | 100Hz°5MHz(-3dB) | 
 
 | EXT Modulation Sensitivity | ∝ 10Vpp for 100?modulation  | 
 
 | FREQUENCY MODULATION  | 
 
 | Deviation & Modulation Frequency | 0°∮50kHz,center at 1MHz, 400Hz fixed(INT), 1kHz fixed(EXT)  | 
 
 | EXT Modulation Sensitivity | ∝ 10Vpp for 10% modulation (center at 1MHz)  | 
 
 | FREQUENCY COUNTER  | 
 
 | Range  | 5Hz°150MHz  | 
 
 | Accuracy  | Time base accuracy∮1count  | 
 
 | Time base  | ∮20ppm(23?∮5?)after 30 minutes warm up | 
 
 | Resolution  | The maximum resolution is 100nHz for 1Hz and 0.1Hz for 100MHz  | 
 
 | Input Impedance | 1M?/150pf  | 
 
 | Sensitivity | ∝ 35mVrms (5Hz~100MHz)∝ 45mVrms (100MHz~150MHz)
 | 
 
 | STORE/RECALL FUNCTION | 
 
 |  | 10 groups of Setting memories  | 
 
 | POWER SOURCE |  | 
 
 |  | AC115V∮10%, AC 230V+10%/-15%, 50/60Hz  | 
 
 | ACCESSORIES  | 
 
 |  | Instruction manual⊙1Power Cord x 1
 GTL-101⊙ 2
 | 
 
 | DIMENSION & WEIGHT | 266(W)⊙107(H)⊙293(D) mmApprox. 3.2kg
 |